image
Southwest Fabricators
503 South Industrial
Hugo, OK 74743
PHONE:
(580) 326-3589
FAX: (580) 326-3573
TOLL FREE: (877) 326-3574

E-mail Us:
troy@overheadbins.com

NEW PRODUCT!

Giant rubber water troughs now available. Call for details and pricing.

image

Southwest Fabricators


 

Bar Six Feed Dispenser

The Bar Six Cattle Feed Dispenser is designed to dispense feed supplements of whole grain, range cubes, feed pellets and other materials up to 1", at the rate of 6 to 10 pounds per second. These Mobile Feeders will dispense hog feed, poultry feed and all livestock rations with equal satisfaction. As an added Bonus these mobile feed dispensers allow your feedlot operation to take advantage of bulk silage transportation savings with your Pickup Truck Mounted Feed Dispensers.

All models made of 16 gauge sheet iron, 3/16" x 1 1/2" angle iron, 4" auger, adjustable V-auger cover, 12 volt motor, 10" pulley, rubber belt, electric cord, solenoid and toggle switch are standard equipment.
 

8 MODELS TO CHOOSE FROM

CAPACITY

Dimensions (W X H X L)


250lb Capacity 

20" X 24" X 40"

450lb Capacity 

24" X 31" X 40"

800lb Capacity 

28" X 33" X 65"

1200lb Capacity

30" X 37" X 77"

1600lb Capacity

30" X 42" X 77"

1800lb Capacity

40" X 45" X 65"

2500lb Capacity

44" X 56" X 65"





Bar Six Feed Dispenser

 

 

 


   

 

T&S Trip Hopper Trailer Feed Dispenser
Sizes available 3000 lbs and 6000 lbs.

The trailer model feeders hold 3000lbs. of 3/4 inch cubes. These feeders will feed in piles at 10 ft. intervals or in a steady trail of feed. You can set the feeder to dump from 1 to 8 lbs. per pile. These feeders are capable of handling cubes, any size, ground feed of any combination thereof.  The feeder is very accurate, so why guess at how much you feed.  The feeders are made of heavy gauge steel and have a 2 inch ball hitch with bulldog jack. They come equipped with 8 ply nylon 15 inch flotation tires.

These models come with a counter that fits under the dash of your truck. When you are feeding, you simply set the flow gate to the desired number of pounds of feed that you want to dump per pile, and each time the feeder dumps, it will register on the counter.  The counter has a pushbutton reset.





T&S Trip Hopper Feed Dispenser

 


 

T&S Truck Model Feed Dispensers
These truck model feeders may be mounted in the back of a pickup, or they can be mounted across a flatbed. All of these feeders work the same way. The trailer is powered by the small wheel being engaged against the ground wheel. The truck model feeder is powered by a 12 volt motor that runs off the truck battery. These are not starter motors. These 12 volt motors are Constant Duty and are C-Face bolted to an oil bath gear reducer. They run for power and not speed.
All wiring, switch and the complete counter assembly come with each feeder. Contact Southwest Fabricators for further details on these or any other model of feed bins.  Truck Model Feeders come in Three Sizes

 

CAPACITY

Dimensions (W X L X H)


300lbs. 24"x30"x 30"
750lbs. 24"x72"x40"
1000lbs. 24"x72"x46"
1250lbs. 24"x72"x52"
1500lbs. 36"x72"x46"
2000lbs. 42"x72"x52"







 

Oklahoma Pride Portable Self Feeder
These portable self feeders are mounted on a tandem axle trailer for ease of transport. The feeders have a 325 bushel capacity, built in feed agitators, eight adjustable feed doors and many other premium features. Check out all of the features by clicking the button at right.
 








Back to Top
image
image